OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
Substrate | PC111, PC112, PC113, PC114, PC115, PC116 |
---|---|
Temperature | 400°F (204°C) |
Prepress | 10 |
Time (min:sec) | 1: |
Pressure | Light to Medium |
Additional | PROSPRAY-II, Lint Roller, Vapor Foam Kit, Nomex Felt |
Recommended Paper | |
Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. 1. Place an appropriate size piece of Vapor Foam or Nomex into the pet shirt2. Lint Roll and prepress 3. Secure transfer to the garment using ProSpray 4. Place garment face up, with attached transfer face down, on top of protective paper on bottom table. 5. Place a sheet of protective paper between the layers of the garment to prevent sublimation ink from transferring onto foam or Nomex 6. Top with protective paper and press according to time, temperature, and pressure above |