OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
| Substrate | U5916, U5588, U4004 |
|---|---|
| Temperature | 400°F (204°C) |
| Time (min:sec) | :55 |
| Pressure | Light |
| Additional | |
| Recommended Paper | DyeTrans Multi-Purpose or TexPrint |
| Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. 1. Cover the bottom table of the press with a sheet of protective paper.2. Secure transfer to substrate using ProSpray. 3. Place substrate face down, with attached transfer face up, on top of protective paper on bottom table. You may print both sides at once; just insert the item between two printed transfers and press. 4. Top with protective paper and press according to time, temperature, and pressure above. See video above for step-by-step instructions for producing multiple Dog Tags using a jig. Application notes: Double-sided items: Let cool completely, repeat steps 1-4 for second side. Do not stack items while hot. Place separately on a table to cool. |