OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
| Substrate | VHG26 |
|---|---|
| Temperature | 360°F (182°C) |
| Time (min:sec) | :50 |
| Pressure | Heavy |
| Additional | Lint Roller |
| Recommended Paper | |
| Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. 1. Place down a layer of protective paper.2. Place a layer of 4-5 soft paper towels. 3. Lint roll the substrate to remove any stray fibers 4. Adhere the transfer in place with the substrate. 5. Place substrate face up( Make sure plastic hook is kept away from the heat platen to prevent melting) with transfer face down. 6. Place a sheet of protective paper on top. 7. Press at 360 for 50 seconds at Heavy pressure 8. Remove immediately after pressing. |