OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
Substrate | YZ159, YZ164 |
---|---|
Temperature | 400°F (204°C) |
Time (min:sec) | 3:30 |
Pressure | Heavy |
Additional | Heat Tape, PROSPRAY-II, Fabric |
Recommended Paper | DyeTrans Multi-Purpose |
Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. Do NOT mirror or reverse image when printing transfer.1. Cover the bottom table of the press with a sheet of protective paper. 2. Use ProSpray or Heat Tape to attach your transfer to the substrate. 3. Place substrate face up, with attached transfer face down, on top of protective paper, on bottom table. 4. Cover it all with a piece of Poly Poplin Fabric (F0008) and press according to time, temperature, and pressure above. Application notes: Do NOT mirror or reverse the image when you print the transfer. |