Binder Portfolio Notebook Sublimation Instructions for NC03K

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Cover the bottom table of the press with a sheet of protective paper.
2. Lint roll the image area of the substrate.
3. Secure transfer to substrate using ProSpray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Hang substrate off edge of heat press to protect back half of notebook.
6. Top with protective paper and press according to time, temperature, and pressure above.

Application notes: Should the faux leather have spotty residue, this can be removed with a household cleaner, such as Simple Green or Windex, and a clean rag.

Updated: August 9, 2018