TexPrint-R or DyeTrans Multi-Purpose
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
45
SECONDS
400
DEGREES
LIGHT
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
1) Cover the bottom press platen with a protective paper sheet to prevent bleed from image.
2) Place the headband, imaging side face up, on the protective paper and lint roll the entire area that will come into contact by the press.
3) Place a piece of protective paper (no wrinkles!) between the layers of the fabric to prevent the image bleeding through to the other side. You also can use Vapor foam for this purpose.
4) Prepress the fabric, let cool.
5) Lightly mist transfer with DyeTrans Pro Spray.
6) Place the transfer on the fabric, smooth wrinkles.
7) Cover with protective paper. This paper must cover the entire area of the material that comes into contact with the heat platen.
8) Press with Temp/Time/Pressure settings listed above.
9) Let cool and flip it over and imprint the other side using the same directions as above.
NOTE: ALL sewn items (shirts, flags, tote bags, huggers, etc.) vary in size and shape to a small degree and may not have perfect 90° corners and may not have perfectly straight edges. Please allow for a +/- 1” tolerance.
Vapor Apparel certifies garments with PURE-Tech, MShield, UPX 50+ and Sublimation Certified designations.
>Click here for explanations of the certifications.
Updated: July 20, 2015
