IMAGE CLIP® Laser Dark Heat Transfer Paper produces a self-weeding, vibrant and wash-durable laser printed transfer on dark and bright colored cotton and cotton/poly blend fabrics. The product can be used to apply JUST the image (no background polymer)! The product runs through a vast array of fuser oil and oil-less laser Color Laser printers and copiers and is approved by OKI for use with their printers, including their "White Toner" Printer series. This product is also compatible with HP INDIGO 7000-1000 series of color printers. IMAGE CLIP® Laser Dark should be applied with a "swing-away" commercial press. This product is Oeko-Tex, Standard 100 approved and is Made in the USA!
Helpful Tips on Using IMAGE CLIP® Laser Dark:
If the polymer sheet (Transfer sheet) is not transferring fully to the Imaging sheet (there are areas that are left untreated), increase the pressure and delay the peeling of the two sheets by 2 to 3 seconds.
If an excessive amount of toner is transferring from the Imaging sheet to the Transfer sheet, the heat press may be too hot or too much pressure was applied.
Allow the paper and shirt to fully cool to room temperature to allow for best color reproduction.
Unless an OKI White Toner Printer is used, IMAGE CLIP® Laser Dark is not recommended for the transferring of photos. Instead, we recommend a "solid film" color laser transfer paper, such as TECHNI-PRINT® EZP (for light substrates) or LASER ONE OPAQUE® (for dark substrates).