Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Vapor Micro Performance Polos and Tees Sublimation for 4078XS

Required Accessories

PROSPRAY-II, Lint Roller, Vapor Foam Kit

Paper

DyeTrans Multi-Purpose or TexPrint

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.


SECONDS

370
DEGREES

LIGHT
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.





1) Cover the bottom press platen with a protective paper sheet to prevent bleed from image and/or shirt dyes.

2) Place the shirt, imaging side face up, on the protective paper and lint roll the entire area that will come into contact by the press.

3) Place a piece of protective paper between the layers of the fabric (if applicable) to prevent the image bleeding through to the other side. You also can use Vapor foam for this purpose.

4) Prepress the fabric, let cool.

5) Lightly mist transfer with DyeTrans Pro Spray.

6) Place the transfer on the fabric, smooth wrinkles.

7) Cover with protective paper. This paper must cover the entire area of the material that comes into contact with the heat platen.

8) Press with Temp/Time/Pressure settings listed above.


Note:
Most darker color Vapor Apparel shirts are not “Sublimation Certified” by Vapor for two reasons:

1. The darker garment has a big impact on the color reproduction of sublimated images.

2. Even when printing very dark or black graphics on a royal blue or Mars red shirt for example, the dyes in the shirt that are subject to the heat will release (they sublimate out) and the shirt will show an obvious faded-looking rectangle from the press platen. One can see the dyes on the spent sublimation release paper. There is no solution to this problem with sublimation.


Vapor Apparel certifies garments with PURE-Tech, MShield, UPX 50+ and Sublimation Certified designations.
>Click here for explanations of the certifications.

Updated: April 14, 2016

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback