Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Vapor Ladies Solar Performance S/S Sublimation Instructions for 6555L

Stacking Order:

HEAT PLATEN
PROTECTIVE PAPER
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
VAPOR FOAM
BOTTOM TABLE

Required Accessories

PROSPRAY-II, Lint Roller, Vapor Foam Kit

Paper

DyeTrans Multi-Purpose or TexPrint

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

50
SECONDS

380
DEGREES

LIGHT
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Place an appropriate size piece of Vapor Foam on the bottom table of the press.
2. Cover the Vapor Foam with a sheet of protective paper.
3. Secure transfer to the garment using ProSpray.
4. Place garment face up, with attached transfer face down, on top of protective paper on Vapor Foam and bottom table.
5. Place a sheet of protective paper between the layers of the garment to prevent sublimation blow-through.
6. Top with protective paper and press according to time, temperature, and pressure above.

Application notes: Press and paper lines can be an issue when pressing shirts. Click here for a video showing how to feather or "deckle" the edge of the transfer.

Updated: July 30, 2018

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback