Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Poker Chip Sublimation Instructions for CC16

Stacking Order:

HEAT PLATEN
PROTECTIVE PAPER
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE

Required Accessories

Heat Tape

Paper

DyeTrans Multi-Purpose or TexPrint

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

45
SECONDS

400°
DEGREES

MEDIUM
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Cover the bottom table of the press with a sheet of protective paper.

2. Secure transfer to substrate using ProSpray or Heat Tape.

3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. You must imprint the 2-sided substrates twice. You cannot imprint both sides at the same time.

4. Top with protective paper and press according to time, temperature, and pressure above.

Application notes: Double-sided items: Let cool completely, repeat steps 1-4 for second side.

Do not stack items while hot. Place separately on a table to cool.

Updated: August 21, 2018

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback