Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Pet Clothes for PC111

Required Accessories

PROSPRAY-II, Lint Roller, Vapor Foam Kit, Nomex Felt

Paper

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

1
MINUTE

400
DEGREES

LIGHT TO MEDIUM
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Place an appropriate size piece of Vapor Foam or Nomex into the pet shirt
2. Lint Roll and prepress
3. Secure transfer to the garment using ProSpray
4. Place garment face up, with attached transfer face down, on top of protective paper on bottom table.
5. Place a sheet of protective paper between the layers of the garment to prevent sublimation ink from transferring onto foam or Nomex
6. Top with protective paper and press according to time, temperature, and pressure above

Updated: March 4, 2021

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback