PROSPRAY-II, Lint Roller, Vapor Foam Kit, Nomex Felt
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
1
MINUTE
400
DEGREES
LIGHT TO MEDIUM
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
1. Place an appropriate size piece of Vapor Foam or Nomex into the pet shirt
2. Lint Roll and prepress
3. Secure transfer to the garment using ProSpray
4. Place garment face up, with attached transfer face down, on top of protective paper on bottom table.
5. Place a sheet of protective paper between the layers of the garment to prevent sublimation ink from transferring onto foam or Nomex
6. Top with protective paper and press according to time, temperature, and pressure above
Updated: March 4, 2021