Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Stainless Steel Mug Sublimation Instructions for SSMUG15-W

Required Accessories

Paper

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

2
MINUTES

375
DEGREES

LIGHT TO MEDIUM
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

Mug Press Instructions:
1. Secure transfer to the Mug using Heat Tape.
2. Surrond with protective paper.
3. Place Mug in Mug Press.
4. Press for 2 minutes at 375°.

Oven Instructions:
1. Affix design to mug using heat tape
2. Cover mug with protective paper
3. Place DYEWRAP05 around mug
4. Place in oven for 10 minutes at 375°
5. Remove from oven
6. Remove DYEWRAP from mug
7. Place on Koolplate or fan to cool

Instructions for Using an Oven and SubliShrink

360° 6 Minutes

1. Remove all plastic parts and lids
2. Cut out design and affix to tumbler using heat tape
3. Place in shrink bag
4. Use heat gun to shrink bag to tumbler
5. Place in oven for 6 minutes at 360°
6. Remove from oven
7. Remove shrink bag and image from tumbler

Updated: March 9, 2020

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback