Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Tiles: Tuscan Porcelain & Tumbled Stone Tile Sublimation Instructions for TP4X4DS

Required Accessories

Heat Tape, Green Pad

Paper

TexPrint

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.


SECONDS

400
DEGREES

LIGHT
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

4" x 4" Tiles................6 Minutes
6" x 6" Tiles................7 Minutes

1) Print the transfer and, using heat tape, secure it to the tile.

2) Place a protective paper sheet onto the bottom rubber platen.

3) With heat tape or Pro Spray, affix the image to be transferred onto the face of the tile. Position the tile face up onto the protective paper.

4) Cover the face up tile with a 1/8" green heat conductive rubber pad.

5) Press according to the instructions in the above table.

Tumbled Stone is a compressed sandstone product that is very porous and must be sealed if used in water applications such as coasters, shower stalls or sink backsplashes.

For an “old world” look you can under expose the tile to heat. Simply press the tile face down onto the press...and shorten the dwell time to 3-4 minutes. Try it!

If you are mounting these tiles and want to use grout: Un-sanded grout should be used. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.

You can press more than 1 tile at a time if you have 2 or more inches of empty space surrounding all four sides of the tile. Add 1 minute of dwell time for each additional tile used during an imprinting session.

*Be careful with the timing, too long in the press may cause purplish discoloration.

Updated: May 27, 2016

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback