Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Julep Polymer Tumbler Instructions for TUM225

Required Accessories

Paper

DyeTrans Multi-Purpose or TexPrint

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

6
MINUTES

30
SECONDS

400
DEGREES

LIGHT
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Remove interior plastic parts and lids
2. Cut out design and affix to tumbler using heat tape
3. Place in shrink bag
4. Use heat gun to shrink bag to tumbler
5. Place in oven for 6.5 minutes at 400°
6. Remove from oven
7. Remove shrink bag and image from tumbler

***do not assemble tumbler until after sublimated
***keep product away from heating elements as it can cause melting

Updated: October 29, 2019

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback