Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Stainless Steel Huggers for TUMHUG222

Required Accessories

Paper

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

2
MINUTES

30
SECONDS

375
DEGREES

MEDIUM
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Secure transfer to the Tumbler using Heat Tape.
2. Cover with protective paper
3. Place Tumbler in Mug Press and close the heating element
4. Press at 375° for 1 minute 15 seconds
5. Rotate tumbler and press for an additional 1 minute 15 seconds

***a green pad (HCR-18610) may be needed for items that are smaller in diameter like water bottles. When using the green pad, please add an additional minute of time to each press.

Instructions for Using an Oven and SubliShrink

1. Remove all plastic parts and lids
2. Cut out design and affix to tumbler using heat tape
3. Place in SubliShrink bag
4. Use heat gun to shrink bag to tumbler
5. Place in oven for 6 minutes at 360°
6. Remove from oven
7. Remove shrink bag and image from tumbler

Updated: November 13, 2020

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback