Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

ChromaLuxe Framing System for U4480

Required Accessories

Paper

N/A

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.


SECONDS

N/A
DEGREES

LIGHT
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

To make a frame for an 8x10” panel, purchase two 8.75” frame sides and two 10.75” frame sides and the pack of hardware. Your panel will be obscured on the outer edge by approximately ¼” all around as it fits into the frame. You will want to adjust your artwork to compensate. The 12’ frame sides are perfect for cutting to fit odd or larger size panels. These large side pieces may be cut down to custom sizes with a miter saw. Conde does not cut these for you. They require a three week lead time and must ship on skids to accommodate the large sizes. Please consult with your Conde Account Manager before ordering.

Please watch video for instructions.

Updated: June 13, 2016

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback