Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

ColorLyte Photo Glass Sublimation Instructions for YZ156

Stacking Order:

HEAT PLATEN
POLY POPLIN
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE

Required Accessories

Heat Tape, PROSPRAY-II, Fabric

Paper

DyeTrans Multi-Purpose

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

3
MINUTES

15
SECONDS

400
DEGREES

HEAVY
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

Do NOT mirror or reverse image when printing transfer.

1. Cover the bottom table of the press with a sheet of protective paper.
2. Use ProSpray or Heat Tape to attach your transfer to the substrate.
3. Place substrate face up, with attached transfer face down, on top of protective paper, on bottom table.
4. Cover it all with a piece of Poly Poplin Fabric (F0008) and press according to time, temperature, and pressure above.

Application notes: Do NOT mirror or reverse the image when you print the transfer.

Updated: December 19, 2018

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback