Flag, Bantam Banner, 100% Polyester, 7.5" x 12" including 2 inch Gold Fringe, hangs on a 12" Wood Dowel with golden end caps, comes with Gold Cord and Tassels. Image area is 7.5"x 10" Excellent for sublimation signs, Coats of Arms, garden art or wall hangings.
Weight: 0.13 lbs
$ 8.19 - 1 to 24$ 8.04 - 25 to 49$ 7.90 - 50 to 99$ 7.49 - 100 and up May be ordered in any quantity from our Alabama WarehouseThis item may be ordered from our California Warehouse in any quantityThis item may be ordered from our Rhode Island Warehouse in any quantity
Heat Press Instructions: 1. Cover the bottom table of the press with a sheet of protective paper.
2. Lint roll the image area of the substrate.
3. Place substrate face up on bottom table, cover with protective paper, and pre-press for 10 seconds.
4. Secure transfer to substrate using ProSpray.
5. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. For double-sided flags place a piece of protective paper between the layers of the flag to prevent sublimation blow- through to the other side.
6. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: The dimensional tolerance on these items is +/- 3/8". make sure you have sufficient bleed of your image to account for a length or width overage.
Product templates can greatly streamline the design, printing, and pressing stages of production. To help our PartnerNET Members, we have created a selection of templates for this product that can be used for free. By using these templates, you can eliminate the need to guess and ensure that your work is consistent and accurate.
Write review this product! Complete this form below and you'll be entered into our weekly prize draw to win a $25 Conde Account Credit! A lucky winner will be drawn randomly on Friday of each week and notified by email.
Are these DyeTrans Sublimation Blank Hanging Bantam Fringed Banner compatible with all sublimation inks? Our DyeTrans Sublimation Blank Hanging Bantam Fringed Banner are compatible with most sublimation inks and systems including Sawgrass® Sublimation Ink(recommended), Epson® Sublimation Ink(recommended), Artesprix® Sublimation Markers & Paints(recommended), Cosmos Ink®, Hiipoo Sublimation Ink, InkOwl® Performance Sublimation Ink, Cricuit® Infusible Ink, Printers Jack Sublimation Ink, Seogol Sublimation Ink, Koala Sublimation Ink, DelTeck, Cricuit Infusible Ink Pens, and many more. Have a question about sublimation ink compatibility? Call one of our experienced consultants today at 1-800-826-6332.
What type of heat press machine do I need to produce these DyeTrans Sublimation Blank Hanging Bantam Fringed Banner? While we recommend a Geo Knight Swing-Away heat press, this product is compatible with most all brands of heat press machines including Geo Knight®, Cricut® EasyPress™, VEVOR® Heat Press Machines, HIX® EVO Series Presses, Stahls® Brand Heat Presses, Hotronix® Presses, and many others. Sublimation transfers require anywhere from 375° to 425° F and demand serious force in pressing often from 40-80 psi so check your manufacturer\'s specs.