2 x 2 Bison Sublimation Blank Ceramic Tiles - 9 Tile Sheet - Satin

Videos

No videos for this product

Client Gallery

Product Instructions

Quick Summary - Click the button below for the full instructions with videos and stacking order.

Time: 0 seconds
Temperature: 400°F (204°C)
Pressure: Medium

Heat Press Instructions:
6” Sheet....6-7 minutes
12” Sheet...10-11 minutes

1” Tile Alone 4 minutes
2” Tile Alone 3.5 minutes
3” Tile Alone 4.5 minutes
Note, when doing single tiles, you will have to remove as much of the glue backing as possible. Try heating the tile and to scrape off.

1) Print the transfer, mirrored.

2) Cover the bottom of the heat press with a Teflon Sheet, do not use protective paper as the tiles will stick to it.

3) Place the transfer on the face of the tile sheet, smooth wrinkles. Use heat tape on each edge to prevent tile sheet from shifting. Be sure the tape does not overlap the image as it comes into contact with the edge of the tile. Improperly applied heat tape will cause the affected area of the transfer to be inhibited.

4) Place the tile sheet face up onto protective paper, transfer on top, tape it to the protective paper. Cover with the protective sheet of paper and apply the green rubber pad on top of the tile.

5) Press with Temp/Time/Pressure settings listed above.

6) Carefully remove tile from the press and allow to air cool. Use a flat sheet of cardboard to move the tile. Then remove the transfer carefully. Do not move the tile again while the glue is re-hardening.



If you are mounting these tiles and want to use grout: Un-sanded grout should be used. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.



Additional Items Needed: Heat Tape, Green Pad, Teflon Sheet
Recommended Paper: TexPrint, DyeTrans Do not use Jetcol

PartnerNET Product Templates

Product templates can greatly streamline the design, printing, and pressing stages of production. To help our PartnerNET Members, we have created a selection of templates for this product that can be used for free. By using these templates, you can eliminate the need to guess and ensure that your work is consistent and accurate.

You are not signed in. Please log in.

Blog Posts

Reviews

Write review this product!
Complete this form below and you'll be entered into our weekly prize draw to win a $25 Conde Account Credit! A lucky winner will be drawn randomly on Friday of each week and notified by email.

Your name

Your email (not displayed publicly)

Your review

Captcha   

Submit

Product Support

Downloads

Suggested Retail Price Range

To view the suggested retail pricing for this item, log in.

Read: The Ultimate Guide to Retail Pricing Sublimation Products