OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
| Substrate | 5002, 5001 |
|---|---|
| Temperature | 400°F (204°C) |
| Time (min:sec) | :50 |
| Pressure | Medium |
| Additional | PROSPRAY-II, Lint Roller |
| Recommended Paper | DyeTrans Multi-Purpose or TexPrint |
| Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. 1. Cover the bottom table of the press with a sheet of protective paper.2. Secure transfer to the pillow case using ProSpray. 4. Place pillow case face up, with attached transfer face down, on top of protective paper on bottom table. 5. If needed, place a sheet of protective paper between the layers of the pillow case to prevent sublimation blow-through. 6. Top with protective paper and press according to time, temperature, and pressure above. If your design includes black and very dark colors, add 10 seconds to press time. Application notes: Press and paper lines can be an issue when pressing fabrics. Click here for a video showing how to feather or "deckle" the edge of the transfer. If your design includes black and very dark colors, add 10 seconds to press time. |