OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
| Substrate | GCB010 |
|---|---|
| Temperature | 400°F (204°C) |
| Time (min:sec) | 3: |
| Pressure | Heavy |
| Additional | Heat Tape, Nomex Felt |
| Recommended Paper | TexPrint |
| Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. 1. First place a sheet of protective paper on the bottom table.2. Place the Nomex felt pad on top next. 3. Place another sheet of protective paper. 4. Affix the transfer to the substrate with either heat tape or Prospray. 5. Place substrate face down, so that transfer rests below the substrate. 6. Press at recommended time, temperature, and pressure. |