Search by Substrate

PROSPRAY-II Instructions

0 seconds

°F (-18°C)

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

CondeTV Video

Detailed Instructions

Substrate PROSPRAY-II
Temperature °F (-18°C)
Time (min:sec) :
Pressure
Additional
Recommended Paper
Heat Press Instructions

Hover transfer under open heat press for 10 seconds to dry excess moisture.

Lightly mist your sublimation transfer to keep the transfer from moving while pressing.

Pressure Cheat Sheet

Contact Level
PSI
Press Dial Level
Average Human Resistance Felt
Contact Pressure
10-15 psi
1 on press dial
where the platen just makes physical contact with product
Light Pressure
20 psi
2 on press dial
resistant with one arm pressing down, easy with two arms
Medium Pressure
40-60 psi
3-5 on press dial
resistant with two arms pressing down, doesn’t require usage of shoulders
Heavy Pressure
80 psi
6 and up on dial
very resistant with two arms pressing down, requires lifting of elbows and shoulders to lock in place
Report a Problem