OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
| Substrate | TAS24, TAS25, TAS-INSERT-01, TAS26, TAS27, TAS-INSERT-02, TAS29, TAS30, TAS-INSERT-03 |
|---|---|
| Temperature | 375°F (191°C) |
| Time (min:sec) | :45 |
| Pressure | Light |
| Additional | Heat Tape, Lint Roller |
| Recommended Paper | DyeTrans Multi-Purpose or TexPrint |
| Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. 1. Cover the bottom table of the press with a sheet of protective paper.2. Secure transfer to substrate using ProSpray or Heat Tape. 3. Place substrate face down, with attached transfer face up, on top of protective paper on bottom table. 4. Top with protective paper and press according to time, temperature, and pressure above. |