OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
| Substrate | U5902, U4005, U5903, U5904, U4006, U9226, U4007, U4698, U4220, U4219, U4695, U4696, U4060, U4058, U4084, U4084-01 |
|---|---|
| Temperature | N/A°F (-18°C) |
| Time (min:sec) | : |
| Pressure | Light |
| Additional | |
| Recommended Paper | N/A |
| Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. Tip: When applying adhesive blocks to the back of metal panels, use fine sandpaper to slightly roughen the area where the glue piece will be applied, it will have a better grip. After you scrub with sandpaper, clean the spot with rubbing alcohol before applying the block.Also, after attachment, allow the blocks to set and harden for at least ten hours before hanging. Maybe use a weight to help the adhesion. Click here for the Unisub Hanging Mount Tip Sheet. |