Search by Substrate

Unisub FRP Bag Tag Sublimation Instructions

1 minute : 15 seconds

400°F (204°C)

Medium

Stacking Order

HEAT PLATEN
PROTECTIVE PAPER
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

CondeTV Video


Detailed Instructions

Substrate U5993, U5897, U5655, U5649, U5556, U5507, U5505, U5503, U60234, U4866, U4936, U4939, U4940
Temperature 400°F (204°C)
Time (min:sec) 1:15
Pressure Medium
Additional Heat Tape
Recommended Paper DyeTrans Multi-Purpose or TexPrint
Heat Press Instructions

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using ProSpray or Heat Tape.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. You must imprint the 2-sided substrates twice. You cannot imprint both sides at the same time.
4. Top with protective paper and press according to time, temperature, and pressure above.

Application notes: Double-sided items: Let cool completely, repeat steps 1-4 for second side.

Do not stack items while hot. Place separately on a table to cool.

Pressure Cheat Sheet

Contact Level
PSI
Press Dial Level
Average Human Resistance Felt
Contact Pressure
10-15 psi
1 on press dial
where the platen just makes physical contact with product
Light Pressure
20 psi
2 on press dial
resistant with one arm pressing down, easy with two arms
Medium Pressure
40-60 psi
3-5 on press dial
resistant with two arms pressing down, doesn’t require usage of shoulders
Heavy Pressure
80 psi
6 and up on dial
very resistant with two arms pressing down, requires lifting of elbows and shoulders to lock in place
Report a Problem