OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
Substrate | VHG25 |
---|---|
Temperature | 360°F (182°C) |
Prepress | 1 |
Time (min:sec) | 2: |
Pressure | Medium |
Additional | |
Recommended Paper | |
Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. 1. Cover the bottom table of the press with a sheet of protective paper, when placing the paddle, the handle needs to be positioned off the side of the press.2. You need to add an item of equal thickness to the opposite side of the press from the substrate, we recommend Nomex felt, or our mousepad material. 3. Cover Paddle with another sheet of protective paper, and prepress for 1 minute . Do not allow paddle to cool back to room temperature. 4. Secure transfer to substrate. 5. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. 6. Top with protective paper and press at 360 for 2 minutes with Medium pressure. 7. Press other side according to same steps. Notes: If the paddle is cooked at too high of a temperature, or for too long, you may notice discoloration in any blank spaces. |