Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Vapor Mens Solar Performance L/S Sublimation Instructions for 4115M

Required Accessories

PROSPRAY-II, Lint Roller

Paper

DyeTrans Multi-Purpose or TexPrint

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

50
SECONDS

380

DEGREES

LIGHT

PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Place an appropriate size piece of Vapor Foam on the bottom table of the press.
2. Cover the Vapor Foam with a sheet of protective paper.
3. Secure transfer to the garment using ProSpray.
4. Place garment face up, with attached transfer face down, on top of protective paper on Vapor Foam and bottom table.
5. Place a sheet of protective paper between the layers of the garment to prevent sublimation blow-through.
6. Top with protective paper and press according to time, temperature, and pressure above.

Application notes: Press and paper lines can be an issue when pressing shirts. Click here for a video showing how to feather or "deckle" the edge of the transfer.

Updated: February 7, 2020

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback