DyeTrans Multi-Purpose or TexPrint
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
60
SECONDS
400
DEGREES
LIGHT TO MEDIUM
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
Do NOT mirror or reverse image when printing transfer.
1. Cover the bottom table of the press with a sheet of protective paper.
2. Remove any peel coat from substrate
3. Secure transfer to substrate using ProSpray.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: One side of the acrylic is glossy and the other is matte. The matte side is the side you imprint. The gloss side has a blue peel coat that needs to be removed prior to pressing.
Updated: August 8, 2018