Heat Tape
DyeTrans Multi-Purpose or TexPrint
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
10
MINUTES
400
DEGREES
LIGHT
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
1. Preheat oven to 400°
2. Cut out template and tape it tightly to your mug
3. Cut your SubliShrink (SF79) down the seam and tape tightly around mug handle.
4. Evenly tighten the wrap by using the heat gun to apply hot air (apply heat to the handle last to ensure the shrink wrap stays tight.
5. Place in preheated oven for 10 minutes
6. Use caution to remove SubliShrink and paper from hot mug immediately
Updated: January 12, 2021