Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Watchband Sublimation Instructions for NLP121

Stacking Order:

HEAT PLATEN
PROTECTIVE PAPER
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE

Required Accessories

PROSPRAY-II

Paper

DyeTrans Multi-Purpose or TexPrint

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

50
SECONDS

375

DEGREES

LIGHT

PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Remove loop from watchband.
2.Secure transfer to substrate using ProSpray.
3.Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4.Top with protective paper and press according to time, temperature, and pressure above.
5. Insert pins and tongue.
6. Attach all lugs and buckle to straps and pins ensuring that the lug side with the 3 black magnetic components are facing up for Apple watches.


Updated: May 20, 2019

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback