Nomex Felt
N/A
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
SECONDS
N/A
DEGREES
LIGHT
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
Use this pad to block off items that should not be near heat sources. Heat Insulating Nomex Felt Pads are soft and heat resistant. The most common use is in pressing ceramic tiles. When pressure is applied the tile sinks into the transfer and the pad, allowing the image to coat beveled edges and provide a better product. This high-temperature resistant material is only needed for ceramic tiles and light switch plates for sublimation printing.
Updated: May 30, 2017