Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

SubliShrink™ Shrink Wrap Film Sublimation Instructions for SF135

Required Accessories

Paper

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.


SECONDS

400

DEGREES

LIGHT

PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Remove all plastic parts from substrate.
2. Secure image to substrate using tape.
3. Place shrink film around substrate, secure with tape if necessary.
4. Use heat gun to form film evenly around blank product.
5. Place in oven for appropriate time.
6. Remove shrink wrap while still warm.

***Application Notes: For doing multiple products at the same time: we recommend you remove one item at a time, remove shrink wrap and repeat. Do not close the door to the oven but leave it partially open so the product and wrap stay hot. Pull down on the seam of the wrap for easiest removal.

Updated: April 23, 2020

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback