DyeTrans Multi-Purpose or TexPrint for good results.
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
SECONDS
N/A
DEGREES
LIGHT
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
The Geo Knight DK32 heat press, available from Condé Systems, features a 26” x 32” fixed-head manual drawer press with a dual-handle design; multi-feature digital control system; SuperCoil-Microwinding heater technology; solid steel loading bed with ultra thick Nomex padding; locking casters; and a full, one-year warranty. Essentially a mid-format MaxiPress, it cuts the cost of large-format printing in half, according to the company.
George Knight® DK32 26"x32" Manual Heat Press with welded stand on locking casters. Pull Out Platen, 208-230V, single phase, 30A breaker. Dual handle design; Fixed head drawer press; Ultra thick heater block assembly; Programmable Presets; Solid steel pressure bars and frame; Heavy duty locking casters.
220V Single Phase, 27 Amps, 6000 Watts, 50/60 cycles
Power plug – Straight Blade 6-30R
Heat platen Dims = 26D x 32W
Bottom Table Dims = 26D x 34W
Bottom table comes with a Nomex pad like the Maxi Presses – no black rubber
Footprint:
Table pushed in / handle down- 35-1/2” wide x 46” deep
Table pulled out/ handle down- 35-1/2” wide x 67” deep
Height = clearance of 72 inches from the floor is needed to operate the press.
Full one year warranty on heating element, controls and entire press; No air required. DK32 crated - 1,128 lbs. DK32 un-crated - 748 lbs.
Weight: 1128.00 lbs
Click here for a great article about the DK32.
Updated: June 15, 2017