PROSPRAY-II, Teflon Sheet
DyeTrans Multi-Purpose or TexPrint
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
60
SECONDS
400
DEGREES
LIGHT
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
1) Cover the bottom press platen with a protective sheet of paper to prevent bleed from image.
2) Place the box, imaging side face up, on the protective paper. Cover the adhesive sticker area with a small piece of teflon .
3) Lightly mist transfer with DyeTrans Pro Spray and place the transfer image face down on top of the box
4) Cover with protective paper.
7) Press.
Updated: July 20, 2015