Products Dropon Table
Shop Below
Item #: DKP-TWIN
Dimensions:
Twin Shuttle Add-On George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK16, DK20 and the DK20S heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the press for spot sublimation ... continue reading
Item #: DKP-SLV5TBL
Dimensions: 5" x 20"
5" Sleeve Table - 5" x 20" George Knight® All Thread Style Interchangeable Drop-On Table for sleeves - Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, and DK25S heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow ... continue reading
Item #: DKP-SLV3TBL
Dimensions: 3.5" x 20"
3.5" Sleeve Table - 3.5" x 20" George Knight® All Thread Style Interchangeable Drop-On Table for sleeves - Compatible with the DK20S, DK20SP, DK25S, and the DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressin ... continue reading
Item #: DKP-SHOE
Dimensions:
Shoe Table - George Knight® All Thread Style Interchangeable Drop-On Table. This table has two flat curved forms extending that are designed to accommodate the quarter (sides) and tongue of most any sneaker. Same substrate material content rules apply as always for heat transfers or dye sublimation. Compatible with the DK16, DK1 ... continue reading
Item #: DKP-CAPBILL
Dimensions:
4-UP Cap-Arc for Flat Cap Bill printing - George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, and DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to ... continue reading
Item #: DKP-8TBL
Dimensions: 8" diameter
8" Diameter George Knight® All Thread Style Circular Interchangeable Drop-On Table, rotatable portrait/landscape (pull-pin version)- Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, and the DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for dif ... continue reading
Item #: DKP-68TBL
Dimensions: 6" x 8"
6" x 8" George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, DK25SP - heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the press ... continue reading
Item #: DKP-35TBL
Dimensions: 3.5" x 5"
3.5" x 5" George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, and DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the p ... continue reading
Item #: DKP-33TBL
Dimensions: 3.5" x 3.5"
3.5" x 3.5" George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, and DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the ... continue reading
Item #: DKP-2025TBL
Dimensions: 20" x 25"
20" x 25" George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK25S, and DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the press for spot sublimation and logo applic ... continue reading
Item #: DKP-2025BHT
Dimensions: 20" x 25"
George Knight Bottom Heat Pedestal, 20"x 25", 110 volts is a separately controlled heated pedestal. Bottom heated platen fits into the standard ALL-THREAD platen. Compatible with DK25S and DK25SP. Separately controlled heat elements allow the convenience of sublimating on both sides of a transfer at the same time.This is ideal for ... continue reading
Item #: DKP-1620TBL
Dimensions: 16" x 20"
16" x 20" George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK20, DK20A, DK20S, DK20SP, DK25S, and DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the press for spot ... continue reading
Item #: DKP-1620BHT
Dimensions: 16" x 20"
George Knight Bottom Heat Pedestal, 16"x 20", 110 volts is a separately controlled heated pedestal. Bottom heated platen fits into the standard ALL-THREAD platen. Compatible with DK20S, DK20SP, DK25S, and DK25SP heat presses. This allows the convenience of sublimating on both sides of a transfer at the same time. This is ideal for ... continue reading
Item #: DKP-1416TBL
Dimensions: 14" x 16"
14" x 16" George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, and DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the pr ... continue reading
Item #: DKP-1416BHT
Dimensions: 14" x 16"
George Knight Bottom Heat Pedestal, 14" x 16", 110 volts. This is a separately controlled heated pedestal. Bottom heated platen fits into the standard ALL-THREAD platen. Compatible with DK20S, DK20SP, DK25S, and DK25SP heat presses. This allows the convenience of sublimating on both sides of a transfer at the same time. These Drop ... continue reading
Item #: DKP-1214TBL
Dimensions: 12" x 14"
12" x 14" George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, and DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the p ... continue reading
Item #: DKP-1012TBL
Dimensions: 10" x 12"
10" x 12" George Knight® All Thread Style Interchangeable Drop-On Table - Compatible with the DK16, DK16A, DK20, DK20A, DK20S, DK20SP, DK25S, and DK25SP heat presses with rotatable portrait/landscape (pull-pin version) shafts, sold separately. Use these tables for different size garments so as to allow for easy dressing of the p ... continue reading
Item #: DKA-68TBL
Dimensions: 6" x 8"
George Knight® 6" x 8" Add-on Optional Drop-On Table. 8" left to right; 6" front to back. Compatible with DC16, DC16AP, DK8, DK8T George Knight Heat Presses, sold separately. Smaller base platens suitable for the older range of heat presses to enable you easily press smaller objects such as shirt pockets or bag panels. NOTE: * ... continue reading
Item #: DKA-68BHT-220
Dimensions: 8" D x 8" W x 13" H
George Knight® Heat Press Bottom Heat Platen Pedestal- Compatible with DC16, DC16AP, DK8, DK8T George Knight Heat Presses, sold separately. Bottom heated 6" x 8", separately controlled heat pedestal slides interchanges with the standard table. The separately controlled heat pedestal slides right into the position the standard tab ... continue reading
Item #: DKA-35BHT
Dimensions: 3" x 5" Platen
George Knight® Heat Press Curved Cap Bottom Heat Platen - Bottom heated 3" x 5", separately controlled platen pedestal slides interchanges with the standard ALL-THREAD table. This is compatible with DK7, DK7T, DC-CAP, DC7 George Knight Heat Presses, sold separately. The separately controlled heat pedestal slides right into the po ... continue reading
Item #: DKA-1620BHT
Dimensions: 16" x 20"
George Knight Bottom Heat Clamshell Pedestal, 16” x 20”, 110 volts is a separately controlled heated pedestal. Bottom heated platen fits into the standard ALL-THREAD platen. Compatible with DK20A and the DK20 heat presses. This allows the convenience of sublimating on both sides of a transfer at the same time. These Drop on Ta ... continue reading
Item #: DKA-1416BHT
Dimensions: 14" x 16"
George Knight Bottom Heat Pedestal, 16” x 20”, 110 volts is a separately controlled heated pedestal. Bottom heated platen fits into the standard ALL-THREAD platen. Compatible with DK20, DK20A, DK16 and DK16A clamshell presses, sold separately. This allows the convenience of sublimating on both sides of a transfer at the same t ... continue reading
Item #: DCA-1416BHT
Dimensions: 14" x 16"
George Knight® Digital Combo Bottom Heat Fixture; Add-On for the DC16 or DC16AP swing away heat press.This attachment fits the DC16, and the automatic version, the DC16AP. Bottom heated 14" x 16" platen pedestal. The separately controlled pedestal slides right into the position the standard table is located. ... continue reading
Did you know Conde has a pricing tool that gives you the suggested retail price range for our entire catalog of print-on-demand blank products?
Start here to learn more about our Retail Pricing Calculator Tool