Same day shipping before 4pm
SKU: 4078XS | Details
IN STOCK!
Adult, Vapor™ Micro Performance-T tee shirt, Mars Red, Long Sleeve. 5oz 100% Micro-Fiber Polyester. This shirt is not suitable for color sublimation because the dark color will not accept colored graphics. It would only accept Black colored logos or graphics. You can use it with vinyl or transfer paper for dark garments.
.Weight: 0.42 lbs
Wholesale Pricing
Financing Available
Found a Better Price?
Quick Summary - Click the button below for the full instructions with videos and stacking order.
Prepress: 10 seconds
Time: 0 seconds
Temperature: 370°F (188°C)
Pressure: Light
Heat Press Instructions:
1) Cover the bottom press platen with a protective paper sheet to prevent bleed from image and/or shirt dyes.
2) Place the shirt, imaging side face up, on the protective paper and lint roll the entire area that will come into contact by the press.
3) Place a piece of protective paper between the layers of the fabric (if applicable) to prevent the image bleeding through to the other side. You also can use Vapor foam for this purpose.
4) Prepress the fabric, let cool.
5) Lightly mist transfer with DyeTrans Pro Spray.
6) Place the transfer on the fabric, smooth wrinkles.
7) Cover with protective paper. This paper must cover the entire area of the material that comes into contact with the heat platen.
8) Press with Temp/Time/Pressure settings listed above.
Note:
Most darker color Vapor Apparel shirts are not “Sublimation Certified” by Vapor for two reasons:
1. The darker garment has a big impact on the color reproduction of sublimated images.
2. Even when printing very dark or black graphics on a royal blue or Mars red shirt for example, the dyes in the shirt that are subject to the heat will release (they sublimate out) and the shirt will show an obvious faded-looking rectangle from the press platen. One can see the dyes on the spent sublimation release paper. There is no solution to this problem with sublimation.
Vapor Apparel certifies garments with PURE-Tech, MShield, UPX 50+ and Sublimation Certified designations.
>Click here for explanations of the certifications.
Additional Items Needed: PROSPRAY-II, Lint Roller, Vapor Foam Kit
Recommended Paper: DyeTrans Multi-Purpose or TexPrint
7200-BF
Vapor Apparel Sublimation Ready Solar Neck Gaiter Endless Face Mask - Mossy Oak Bonefish
$5.50 ea
Over three decades of research and development - helping small businesses like yours profit from sublimation and heat transfer technology.
