MADE IN THE USA

Clear Vinyl Strap Clip for Lanyards

SKU: VSC01 Add to Favorites | Details

IN STOCK!

Clear Vinyl Strap Loop With Steel Snap, 2.75" x .5". This clip has a snap to hold the slotted ID badge (U6034 or U6048, sold separately) and a metal grab clip that attaches to collar or pocket, does not require a cloth lanyard. Our strap clip is a combination swivel bulldog clip with a snap-close plastic strap attachment. Either the clip or the strap part can be used with tags that have a punched flat hole (slot) in them. Pack of 25.

Weight: 0.17 lbs

Wholesale Pricing

$ 5.25 - 1 to 5$ 4.99 - 6 to 17$ 4.85 - 18 to 59$ 4.78 - 60 and up May be ordered in any quantity from our Alabama Warehouse

Videos

No videos for this product

Client Gallery

Product Instructions

Quick Summary - Click the button below for the full instructions with videos and stacking order.

Prepress: 10 seconds
Time: 1 minute : 0 seconds
Temperature: 400°F (204°C)
Pressure: Light

Heat Press Instructions:
You will also need 2 pieces of cardboard or aluminum (serving as lanyard backing material) cut to the size of the bottom heat press platen.

1. Place a sheet of protective paper.
2. Pre-Press the lanyard for 10 seconds, take off the press to cool.
3. Lightly mist the transfer with Pro Spray
4. Place a protective sheet of paper on a sheet of lanyard backer.
5. Place the transfer, imaging side face-up, onto protective sheet.
6. Align the lanyard, imaging side facedown, over the transfer and adhere. Note: if you are printing solid backgrounds, then an aggressive image bleed will be required as the lanyard expands when it is being pressed.
7. Place a protective sheet of paper over the lanyard then cover with a sheet of backing material sandwiching the transfer and lanyard material in between the 2 lanyard backers.
8. Holding the 2 sheets of backing material together, flip them so the transfer is now facedown onto the face-up imaging area of the lanyard.
9. Remove the top lanyard backer, place the bottom backer layer (with the transfer and lanyard material on top) onto the rubber heat press platen.
10. Gently remove the bottom backer and press.

Recommended Paper: DyeTrans Multi-Purpose or TexPrint

View Complete Instructions

Blog Posts

Reviews

Write review this product!
Complete this form below and you'll be entered into our weekly prize draw to win a $25 Conde Account Credit! A lucky winner will be drawn randomly on Friday of each week and notified by email.