How to Sublimate Poly Coated Watchbands

As business owners, we know that staying on top of the latest trends is key to maintaining relevancy with clients. Product lines MUST evolve and bring in new and interesting merchandise. Because most of Condé’s employees wear smartwatches to keep in constant contact with clients, they are a trend we have been following for years. However, because we strive for quality, they took a bit longer to add to the Condé line than anticipated.

Our new DyeTrans® Sublimation Blank Watch Band is a fashion band that finally allows smartwatches to be truly personalized at very little cost. Whether your client needs them for company promotions, selling at events, or just really likes the idea of customizing their watchbands, these work perfectly. The following instructions will help you to complete the sublimation process for one.

Materials Needed

Digital template

Printed Transfer

ProSpray™

Protective paper

AWB4244 or AWB3840 watch bands

Teflon Sheet

Instructions:

1. Download a digital product template and use it to create the uniquely shaped artwork.

2. Print the transfer and cut/trim the printed portion from the page.

3. Remove loop from band.

4. Place pins in straps.

5. Cover bottom table of heat press with Teflon.

6. Secure transfer to substrate using tape or ProSpray™.

7. Place band on top of Teflon with image attached face down.

8. Cover with protective paper and press at 365°F for 60 seconds using light pressure.

9. Pull pin out of buckle strap and reinsert with tongue.

10. Attach all lugs and buckle to straps and pins ensure that the lug side with the 3 black magnetic components are facing up.

*if sublimating loop, place piece of protective paper in middle of loop to keep from sticking, then press according to time, temp, and pressure above.