Artesprix® Sublimation Markers, Pack includes 10 markers - Red, Orange, Yellow, Brown, Black, Light Blue, Dark Blue, Green, Magenta and Purple. 10 chisel tip permanent thermal transfer markers. Nib 1-4mm, vented cap, ergonomic grip. Transfer your designs from any copy paper to polyester fabric or sublimation coated items. By adding heat and pressure to your drawing, you can permanently transfer the image from plain paper to polyester products. Let the kids, or the artist in family, have fun and come up with their own custom designs or artwork. Can be used with any copy paper. The final product is a mirror image so any text must be reversed. The final transferred image will appear brighter than it does on paper. Not recommended for unsupervised handling by children under 10.
Weight: 0.24 lbs
$ 29.00 - 1 and up May be ordered in any quantity from our Alabama Warehouse
Heat Press Instructions: How to Use Sublimation Markers
Use the markers to create your artwork on plain paper. The final product is a mirror image so any text must be reversed (a stencil may be helpful). The final transferred image will appear brighter than it does on paper. Note: Be sure to protect your drawing surfaces from marker ink bleed by placing additional sheet(s) of paper underneath the original.
When drawing, remember that your design will be pressed onto your blank item and it will be a mirror image of whatever you draw. (This means that if you are writing text, your text will need to be written backwards!)
Place the design onto your blank product. You must use a polyester blank or a specially prepared sublimation blank. Secure your design face down to the item you want to transfer to using thermal tape. Be sure to remove any protective film from the blank prior to transfer.
Tape your design in place with heat transfer tape so that it won't slide around when you close your Heat Press.
Press the design. Use the time and transfer settings indicated by the blank item you are using. Every item you sublimate images onto may require different time and/or temperature settings. For best results, refer to transfer instructions given with the chosen blank.
Allow item to cool before handling.
Remove the paper and tape and admire your work!
While not in use, your markers should lay horizontally. Before use, place markers tip down for approximately 15 minutes (30 minutes for brand new packs). Leaving your markers tip down for an extended period of time could saturate your marker nib, however, leaving markers tip up could cause them to appear dried out momentarily and allowing time for the ink to re-saturate the nib will be necessary.
These markers fit in the pen holder on your Silhouette® cutting machine to give you precise text on your transfers.
For best results use a heat press. 20 psi, 350-400°F for 45-300 seconds (varies according to material)
If using an iron use the highest setting with NO steam. Press firmly with the iron while moving iron slowly for 1-5 min. Do not leave your iron unattended.
Oven: (For ceramics only). Be sure to secure image with a mug wrap. Do not leave oven unattended.
May cause eye and skin irritation. Skin contact may cause allergic reaction. Avoid eye and skin contact. Wash thoroughly after handling. Not intended to be used on the skin. First Aid: For eye contact, immediately flush eyes with water for 15 minutes. Call a physician. For skin contact, wash with soap and water.
KEEP OUT OF THE REACH OF CHILDREN. Not intended to be used by children.
Love these markers. I made a t-shirt for my granddaughter starting kindergarten. The markers were so easy to use and the colors once pressed were incredible. I would highly recommend. Pam French
ABSOLUTELY LOVE THESE MARKERS! THE ARTWORK THE KIDS DID FOR THEIR DAD WOW SO VIBRANT!
Write review this product! Complete this form below and you'll be entered into our weekly prize draw to win a $25 Conde Account Credit! A lucky winner will be drawn randomly on Friday of each week and notified by email.
Are these Artesprix® Sublimation Markers, (Pack of 10) compatible with all sublimation inks? Our Artesprix® Sublimation Markers, (Pack of 10) are compatible with most sublimation inks and systems including Sawgrass® Sublimation Ink(recommended), Epson® Sublimation Ink(recommended), Artesprix® Sublimation Markers & Paints(recommended), Cosmos Ink®, Hiipoo Sublimation Ink, InkOwl® Performance Sublimation Ink, Cricuit® Infusible Ink, Printers Jack Sublimation Ink, Seogol Sublimation Ink, Koala Sublimation Ink, DelTeck, Cricuit Infusible Ink Pens, and many more. Have a question about sublimation ink compatibility? Call one of our experienced consultants today at 1-800-826-6332.
What type of heat press machine do I need to produce these Artesprix® Sublimation Markers, (Pack of 10)? While we recommend a Geo Knight Swing-Away heat press, this product is compatible with most all brands of heat press machines including Geo Knight®, Cricut® EasyPress™, VEVOR® Heat Press Machines, HIX® EVO Series Presses, Stahls® Brand Heat Presses, Hotronix® Presses, and many others. Sublimation transfers require anywhere from 375° to 425° F and demand serious force in pressing often from 40-80 psi so check your manufacturer\'s specs.