20 oz DyeTrans Sublimation Blank Stainless Steel Water Bottle - Clear with Straw Top

Videos

No videos for this product

Client Gallery

Explore what others are creating with sublimatable products from Condé! Our Client Galleries are an excellent source of inspiration to help you grow your Sublimation Business. Be sure to check back frequently as new images are submitted daily.

There are 10 images in our Client Image Galleries for this product.
Click here to view the images for this product family

Wine tumbler

Peeps!

Spring flowers and butterfly wine tumbler

Stainless Steel Wine Tumbler

Peeps!

Pet Contest - Julep Stainless Steel Polymer Tumbler

Peeps!

Peeps!

Product Instructions

Quick Summary - Click the button below for the full instructions with videos and stacking order.

Time: Varies by Method
Temperature: Varies by Method
Pressure: Varies by Method

Heat Press Instructions:
If you are imaging in a mug press, you will need a 1/8" thick green rubber pad to help the water bottle fit snugly in the press.


1) Remove the cap from the top of the bottle. Remove the water bottle lids before sublimating.

2) Apply image to be transferred face down onto the bottle. You may use either DyeTrans Pro Spray or heat tape to secure the transfer to the bottle. Just be sure not to let the heat platen or the rubber on the wrap overlay the tape.

3) Cover entire imaging area with protective paper.

4) Wrap the bottle with rubber or dyewrap. Note that the rubber pad is slightly longer than the imaging area of the bottle. This is so you can easily position the bottle in the press in that you have more area to "pinch" the rubber while positioning it in the press.

5) Press at 400, for 3 min and 30 secs , at a Light pressure.

Note from George Knight Presses: We cannot emphasize enough: NO pressing narrow water bottles without the extra rubber pad! You will pinch/overstretch/bend the heater if you try and force-press the water bottle with only one pad in the press (no extra pad).


Shrink Wrap Instructions:
Instructions for Using an Oven and SubliShrink

Time: 4-5 Minutes
Temp: 400°

1. Remove all lids or plastic parts.
2. Secure image to substrate using heat tape.
3. Place SubliShrink around blank, secure with tape if necessary.
4. Use heat gun to form SubliShrink evenly around blank product.
5. Place in oven for appropriate time and temperature.

**Shrink film may stick to top edge of bottles. To prevent this, wrap the bottle in protective paper before placing in the SubliShrink.

Recommended Paper: DyeTrans Multi-Purpose or TexPrint

PartnerNET Product Templates

Product templates can greatly streamline the design, printing, and pressing stages of production. To help our PartnerNET Members, we have created a selection of templates for this product that can be used for free. By using these templates, you can eliminate the need to guess and ensure that your work is consistent and accurate.

You are not signed in. Please log in.

Blog Posts

Reviews

WHAT OUR CUSTOMERS SAY

I love these bottles. They are a hit for kids in the wake of the "Yeti" Craze. One issue that I had was a light outline where paper or tape was on the bottle. We use the same solution we use for all metal sublimated items. We rub it out with acrylic polish, Novus#2 fine scratch remover. It brings out the shine in the coating and removes all paper and tape distortion in seconds. It makes for a fantastic finished product! We will definitely be using a LOT of these bottles!
Jerry Moriearty

Sublimated beautifully however they did not keep ice for very long.
Kathleen Jones

Write review this product!
Complete this form below and you'll be entered into our weekly prize draw to win a $25 Conde Account Credit! A lucky winner will be drawn randomly on Friday of each week and notified by email.

Your name

Your email (not displayed publicly)

Your review

Captcha   

Submit

Product Support

Downloads

Suggested Retail Price Range

To view the suggested retail pricing for this item, log in.

Read: The Ultimate Guide to Retail Pricing Sublimation Products