PROSPRAY-II, Green Pad
DyeTrans Multi-Purpose or TexPrint
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
SECONDS
400
DEGREES
MEDIUM; PSI FOR AUTOMATIC PRESSES: 40
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
1) Print transfer NOT MIRROR IMAGED.
2) Place nail file coated (white) side up on platen.
3) Using DyeTrans Pro Spray affix the image to the imaging side (white side) of the nail file. (Face down)
4) Apply a piece of 1/16” thin green heat conductive rubber on the transfer.
5) Press.
Updated: July 20, 2015