DyeTrans Multi-Purpose or TexPrint
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
50
SECONDS
375
DEGREES
LIGHT
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
1. Cover the bottom table of the press with a sheet of protective paper.
2. Place blank product on bottom platen, cover with another sheet of protective paper and prepress for 10 seconds
3. Place a piece of protective paper in between the sleeve and brown top of card caddy to avoid getting your image on the brown backing
4. Secure transfer to substrate using ProSpray, do not use tape.
5. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
6. Top with protective paper and press according to time, temperature, and pressure above.
Updated: January 26, 2023
