Heat Tape
DyeTrans Multi-Purpose or TexPrint
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
6
MINUTES
360
DEGREES
MEDIUM
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
1. Remove all plastic parts and lids
2. Cut out design and affix to tumbler using gold heat tape
3. Place in SubliShrink bag
4. Use heat gun to shrink bag to tumbler
5. Place in oven for 6 minutes at 360°
6. Remove from oven
7. Remove shrink bag and image from tumbler
**TUM213 & TUM214 are not recommended for full bleed images.
Updated: August 20, 2019