Heat Tape
DyeTrans Multi-Purpose or TexPrint
OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
SECONDS
400
DEGREES
MEDIUM
PRESSURE
Hover transfer under open heat press for 10 seconds to dry excess moisture.
* Add 2 extra seconds for every additional piece pressed at the same time.
1) Print the transfer.
2) Cover the press with protective paper.
3) Lightly mist transfer with DyeTrans Pro Spray. You may also use heat tape to secure the insert to the transfer.
4) Place the transfer on the Insert, smooth wrinkles.
5) Place face up on the press and cover with protective paper.
6) Press.
7) Remove the insert quickly and turn over and press with a weight until cool to combat warping.
Updated: April 14, 2016